Friday, July 4, 2014

3D printing with wood filament

3D printing with wood filament
This week the wood filament by laywood is explored for 3D printing using makerbot replicator2. 3D printing in wood offers a new range of application.  Experimentation with this new medium to explore the possibilities of what can it used for. The beauty of this wood filament, it can be post treated as per the usual wood working, sanding included.
Loading of the wood filament into makerbot replicator2 for 3D printing is a breeze. Check out the previous post of modifying the loading mechanism http://shin-ajaran.blogspot.sg/2014/04/3d-printing-using-ninjaflex-with.html
Standard PLA setting from makerware is used, but the temperature is set to 180degC instead of the usual 210degC to explore the texture and colour of the 3D printed parts. “Oozing” is observed from the 3D printed parts. Oozing in this context refers to the web of fine threads hanging from wall to wall of the model akin to a spider web. It has a term for it: “oozing while printing”.
Further refinement of the speed of filament extrusion/retraction, speed while extruding, and speed while travelling need to be tweaked to achieved a “cleaner” 3D printed parts.
A challenging model to print without support, due to the overhangs that are spiralling up.

This is the final output is plague with “oozing while printing”. Mentioned earlier, tweaking of the movement speeds of the 3 parameters are still waiting to be tweaked to perfection.

This website http://reprage.com/post/37966750340/how-do-i-stop-plastic-from-oozing-when-3d-printing/ offers some suggestions such as lowering the temperature of the hot end, reducing the movement speed, and increasing the retraction length. All the above requires time to discover the best settings!

No comments: